DTDrop TrackerConnecting…

Settings

No SETTINGS_PIN is set, so anyone with the link can change settings.

General

Length

Stored internally in exact millimetres, so changing this never changes recorded lengths.

Lengths that do not fall on this grid are shown as decimals rather than silently rounded.

Shown on the Add drop form so operators measure consistently. It does not change any calculation.

Search shows drops at least (length needed + allowance). Use it for saw kerf and squaring trims. Default 0: no allowance is assumed until the shop decides one.

Die and finish values

Custom color pieces older than this are listed under Needs attention as due for scrap. Leave blank to turn off.

Checkout and labels
QR scan requirements

Choose when a worker must scan a QR code before the record changes. Scans that are turned off show as optional. Once a piece is scanned, it stays confirmed until the worker leaves that page.

Current allowance: 0". Last changed by Alex V (self-reported).

Rack slots

Slots with drops in them cannot be deactivated. Deactivated slots stay in history.

  • WHS-5-F-1 Active · 2 available
  • WHS-8-A-1 Active · 3 available
  • WHS-8-A-6 Active · 1 available
  • WHS-8-B-4 Active · 1 available
  • WHS-8-F-1 Active · 1 available
  • WHS-8-F-8 Active · 1 available
  • WHS-9-B-2 Active · 1 available
  • WHS-9-B-7 Active · 1 available
  • WHS-11-C-3 Active · 2 available
  • WHS-13-I-4 Active · 2 available

Maintained value lists

Tap a value to retire or restore it. Retired values stay on existing records.

Color codes

The last part of a part number is the color code, e.g. EA012497-23-15. Renaming a code updates every drop that uses it.

  • 00
  • 02
  • 11
  • 15
  • 51
  • 52

Add a color code

Drop limits per die and color

Caps how many drops of one die and color are kept. Pieces checked out, awaiting storage or missing count toward the limit.

  • Die EA012497 · 00 - MillAt most 600" in total

Add a limit

Pick from the maintained die list.

Pick from the maintained color list.

Limit by

When this many pieces are held, adding another is blocked and the operator is told to scrap it.

Deployment

QR base URL (APP_BASE_URL)
https://solarmanufacturing.app/droptracker
Print service (PRINT_SERVICE_URL)
Not configured. Browser printing only.
Settings PIN (SETTINGS_PIN)
Not set